Hyundai Tucson: Hydraulic System / Oil Pump Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump Description and Operation

Description

The oil pump is built-in as a single unit with the 2/6 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Oil Cooler Repair procedures

Inspection Radiator Cap Testing 1. Remove the radiator cap, wet its seal with engine coolant, and then install it on a pressure tester. 2. Apply a pressure of 93.16 ~ 122.58 kPa (0.95 ~ 1.25 ...

Oil Pump Components and Components Location

Components 1. Reaction shaft support assembly2. Oil pump housing3. Driven gear4. Drive gear5. Oil seal6. Bushing-housing7. Reaction shaft8. Bushing-reaction shaft9. Sleeve10. Flange bolt Oil P ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Radiator Components and Components Location
Components 1. Cooling fan & shroud2. Radiator3. Radiator upper hose4. Radiator lower hose5. Mounting insulator6. Reservoir tank7. Fan motor ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Body Control Module (BCM) Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center facia panel. (Refer to BD group - "Crash pad center panel") 3. Loosen the nut and bolt from BCM. 4. Disconnect the connectors (A). Installation 1. Install the BCM and connect the connectors. 2. In ...