Hyundai Tucson: Propeller Shaft Assembly / Propeller Shaft Repair procedures

Removal

After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

Remove the center bearing bracket (A) mounting bolts (B-2ea).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

After making a match mark on the flange yoke and transaxle companion, remove the propeller shaft mounting bolts (A).

Tightening torque:

49.0 ~ 68.6 N.m (5.0 ~ 7.0 kgf.m, 36.1 ~ 50.6 lb-ft)

Do not reuse bolts.

Install in the reverse order of removal.

•	When assembling propeller shaft, locate marks on flange yoke and T/M transfer flange to be nearly the same loacation.

Components 1. Front propeller shaft2. Center bearing bracket3. Rear propeller shaft ...

...

Hyundai Tucson (LM) 2010-2015 Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the resistance is within the specification. Removal Replacing an on/off soleno ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Components and Components Location
Component Location 1. Rear glass defogger relay2. Rear glass defogger switch3. Rear glass defogger ...