Hyundai Tucson: Seat Belt Pretensioner / Anchor Pretensioner Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / Seat Belt Pretensioner / Anchor Pretensioner Description and Operation

Description
Anchor pretensioner operates as well as belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on front seat and it is an equipment to make up for the existing short stroke. Anchor pretensioner is supported by two cables and it is an auxiliary equipment to prevent a driver from breaking away doubly as seat belt is being pulled toward anchor side after a collision.
   
Never measure resistance of anchor pretensioner directly, current of measuring device may cause unexpected airbag deploy.
Seat Belt Pretensioner (BPT) Repair procedures
Removal 1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. To remove the seat belt anchor pretensioner (C), keep on pushing the lock pin ...

Anchor Pretensioner Components and Components Location
Components ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Temperature Control Actuator Repair procedures
Inspection 1. Ignition "OFF" 2. Disconnect the connector of temperature control actuator. 3. Verify that the temperature control actuator operates to the hot position when connecting 12V to the terminal 3 and grounding terminal 4. Verify that the temperature control actuator operate ...

Hyundai Tucson (LM) 2010-2015 Service Manual: SRS Control Module (SRSCM) Repair procedures
Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Disconnect the DAB, PAB, SAB, CAB and BPT connectors. 4. Remove the floor console. (Refer to the Body group - console) 5. Pu ...

© 2010-2024 www.htmanual.net