Hyundai Tucson: Brake System / Brake Line Components and Components Location

Master Cylinder Repair procedures

Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the battery positive terminal and them remove the battery. 3. Disconnect the ECM connector ...

Brake Line Repair procedures

Removal 1. Disconnect the brake fiuid level switch connector, and remove the reservoir cap. 2. Remove the brake fluid from the master cylinder reservior with a syringe.     ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Removal 1. Remove the liftgate trim in the trunk after removing the screws and clips. (Refer to the BD group - "Liftgate") 2. Remove the liftgate garnish (A) after disconnecting the connector and removing the nuts. 3. Remove the back view camera (A) after loosening the screws (2EA). ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Mode Control Actuator Repair procedures
Inspection 1. Ignition "OFF” 2. Disconnect the connector of mode control actuator. 3. Verify that the mode control actuator operates to the defrost mode when connecting 12V to the terminal 3and grounding terminal 4. 4. Verify that the mode control actuator operates to the vent mo ...