Hyundai Tucson: Front Suspension System / Front Stabilizer Bar Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Suspension System / Front Suspension System / Front Stabilizer Bar Repair procedures

Replacement

Remove the front wheel & tire.

Tightening torque :

88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

Be careful not to damage to the hub bolts when removing the front wheel & tire.

Disconnect the stabilizer link (B) with the front strut assembly (A) after loosening the nut.

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

Remove the sprit pin and castle nut and then disconnect the tie-rod end (A) from the front knuckle.

Tightening torque :

23.5 ~ 33.3 N.m (2.4 ~ 3.4 kgf.m, 17.4 ~ 24.6 lb-ft)

Loosen the bolt & nut and then remove the lower arm (A).

Tightening torque :

98.1 ~ 117.7N.m (10.0 ~ 12.0kgf.m, 72.3 ~ 86.8lb-ft)

5.	Loosen the nut and then remove the dust cover (A).

Loosen the bolt (A) and then disconnect the universal joint assembly from the pinion of the steering gear box.

Tightening torque :

32.4 ~ 37.3 N.m (3.3 ~ 3.8 kgf.m, 23.9 ~ 27.5 lb-ft)

Lock the steering wheel in the straight ahead position to prevent the damage of the clock spring inner cable when you handle the steering wheel.

Loosen the bolt (A) & nut (B) and then remove the roll rod stopper.

Tightening torque :

107.9 ~ 127.5N.m (11.0 ~ 13.0kgf.m, 79.6 ~ 94.0lb-ft)

8.	Disconnect the muffler rubber hanger (A).

Loosen the bolts & nuts and then remove the sub frame.

Tightening torque :

176.5 ~ 196.1N.m (18.0 ~ 20.0kgf.m, 130.2 ~ 144.7lb-ft)

10.

Loosen the bolt & nut and then remove the protactor (A).

Tightening torque :

7.8 ~ 11.8 N.m ( 0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

11.

Loosen the bolt and then remove the stabilizer (A) from the sub frame.

Tightening torque :

44.1 ~ 53.9N.m (4.5 ~ 5.5kgf.m, 32.5 ~ 39.8lb-ft)

12.	Installation is the reverse of removal.

Inspection

1.	Check the bushing for wear and deterioration.

2.	Check the front stabilizer bar for deformation.

3.	Check the front stabilizer link ball joint for damage.

Front Lower Arm Repair procedures

Removal 1. Remove the front wheel & tire. Tightening torque : 88.25 ~ 117.68 N.m (9.0 ~ 12.0 kgf.m, 65.1 ~ 86.8 lb-ft) Be careful not to damage to the hub bolts w ...

Front Cross Member Repair procedures

Replacement 1. Remove the front wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) Be careful not to damage to the hub bolts w ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Anti-lock Brake System (ABS)
WARNING An Anti-Lock Braking System (ABS) or an Electronic Stability Control (ESC) system will not prevent accidents due to improper or dangerous driving maneuvers. Even though vehicle control is improved during emergency braking, always maintain a safe distance between you and objects ahead ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Crankshaft Position Sensor (CKPS) Description and Operation
Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the engine may stop because of CKPS signal missing. This sensor is installed in ladder frame and generates ...