Kia Sportage: Camshaft Position Sensor (CMPS): Description and Operation - Engine Control System - Engine Control / Fuel System - Kia Sportage SL Service & Repair ManualKia Sportage: Camshaft Position Sensor (CMPS): Description and Operation

Third generation SL (2010Ц2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS): Description and Operation

Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can''t detect.
The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.

Crankshaft Position Sensor (CKPS): Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to УWave FormФ Removal 1. Turn the ignition switch OFF and disconnect the battery negat ...

Camshaft Position Sensor (CMPS): Troubleshooting
Wave Form ...

Other Information:

Cowl Top Cover: Repair procedures
Replacement 1. Remove the wiper arm cover (B). 2. After loosening the mounting nuts, then remove the wiper arm (A). Tightening torque : 22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft ...

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of y ...

Categories

Copyright © www.htmanual.net 2014-2018