Hyundai Tucson: Back View Camera System / Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Back View Camera System / Description and Operation

Description

Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.

This system is a supplemental system that shows behind the vehicle through the ECM (Reverse Display Room Mirror) mirror or AVN head unit while backing-up.

This system is a supplementary function only. It is the responsibility of the driver or always check the inside/ outside rearview mirror and the area behind the vehicle before and while backing up because there is a dead zone that can't see through the camera.

Schematic Diagrams

Circuit Diagram ...

Repair procedures

Removal 1. Remove the liftgate trim in the trunk after removing the screws and clips. (Refer to the BD group - "Liftgate") 2. Remove the liftgate garnish (A) after disconnecting the connector ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description Automatic Transaxle System relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the actuators and achieve the desired control output. If a problem with ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Components and Components Location
Component Location 1. Auto light sensor2. Head lamps3. Lighting switch (Auto)4. Tail lamps5. SJB (Smart Junction Box)6. BCM (Body Control Module) ...