Hyundai Tucson: Engine Control System / Fuel Pressure Control Valve Repair procedures

Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specification.

Specification: Refer to “Specification”

Removal
(Refer to Fuel Delivery System - "High Pressure Fuel Pump”)
Installation
(Refer to Fuel Delivery System - "High Pressure Fuel Pump”)
Fuel Pressure Control Valve Schematic Diagrams
Circuit Diagram (M/T) (A/T) ...

Canister Close Valve (CCV) Description and Operation
Description Canister Close Valve (CCV) is normally open and is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosph ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Low tire pressure indicator
The low tire pressure indicator comes on for 3 seconds after the ignition switch is turned to the "ON" position. The low tire pressure indicator illuminates when one or more of your tires is significantly underinflated. The low tire pressure indicator will illuminate after it blinks for appr ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Power Door Lock Actuators Repair procedures
Inspection Front Door Lock Actuator 1. Remove the front door trim. (Refer to the BD group - "Front door") 2. Remove the front door module. (Refer to the BD group - "Front door") 3. Disconnect the connectors from the actuator. 4. Check actuator operation by connecting power and gro ...

© 2010-2024 www.htmanual.net