Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification. |
Removal |
Replacing an on/off solenoid valve (SS-A, SS-B) does not
require additional hydraulic pressure adjustment; however, the hydraulic
pressure will need to be adjusted after replacing the VFS solenoid
valve. If replacing the VFS solenoid valve; also replace the valve body
assembly.
(Refer to Hydraulic system - "Valve Body") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: If the engine will not start
If the engine doesn't turn over or turns over slowly
Be sure the shift lever is in N (Neutral) or P (Park). The engine starts
only when the shift lever is in N (Neutral) or P (Park).
Check the battery connections to be sure they are clean and tight.
Turn on the interior light. If the ligh ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: ESC OFF usage
When driving
The ESC OFF mode should only be used briefly to help free the vehicle if stuck
in snow or mud by temporarily stopping operation of the ESC to maintain wheel torque.
To turn ESC off while driving, press the ESC OFF button while driving on a flat
road surface.
CAUTION
To prevent d ...