Hyundai Tucson: SRSCM / Front Impact Sensor (FIS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description and Operation

Description

The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.

SRS Control Module (SRSCM) Repair procedures

Removal 1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning work. 3. Disconnect the DAB, PAB, SAB, CA ...

Front Impact Sensor (FIS) Components and Components Location

Components ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: For safe AWD operation
Before driving Make sure all passengers are wearing seat belts. Sit upright and closer to the steering wheel than usual. Adjust the steering wheel to a position comfortable for you to drive. Driving on snow-covered or icy roads Start off slowly by applying the accelerator pedal gentl ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Camshaft Repair procedures
Removal Timing chain cover removal is not required for this procedure. • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefully while holding the connector portion. • Mar ...