Hyundai Tucson: General Information / Specifications
Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / General Information / Specifications
| Specifications |
| Fuel Delivery System |
| Items | Specification | |
| Fuel Tank | Capacity | 58x (15.3 U.S.gal., 61.3 U.S.qt., 51.0 Imp.qt.) |
| Fuel Filter | Type | Paper type |
| Fuel Pressure | Low Pressure Fuel Line | 495 ~ 505 kPa (4.9 ~ 5.1 kgf/cmx, 71.8 ~ 73.2 psi) |
| High Pressure Fuel Line | 2.0 ~ 15.0 MPa (20.4 ~ 153.0 kgf/cmx, 290.1 ~ 2175.6 psi) | |
| Fuel Pump | Type | Electrical, in-tank type |
| Driven by | Electric motor | |
| High Pressure Fuel Pump | Type | Mechanical type |
| Driven by | Camshaft | |
| Sensors |
Manifold Absolute Pressure Sensor (MAPS)
x Type: Piezo-resistive pressure sensor type
x Specification
| Pressure [kPa (kgf/cmx, psi)] | Output Voltage (V) |
| 20.0 (0.20, 2.9) | 0.79 |
| 46.7 (0.47, 6.77) | 1.84 |
| 101.3 (1.03, 14.7) | 4.0 |
Intake Air Temperature Sensor (IATS)
x Type: Thermistor type
x Specification
| Temperature | Resistance (kx) | |
| °C | °F | |
| -40 | -40 | 40.93 ~ 48.35 |
| -20 | -4 | 13.89 ~ 16.03 |
| 0 | 32 | 5.38 ~ 6.09 |
| 10 | 50 | 3.48 ~ 3.90 |
| 20 | 68 | 2.31 ~ 2.57 |
| 40 | 104 | 1.08 ~ 1.21 |
| 50 | 122 | 1.56 ~ 1.74 |
| 60 | 140 | 0.54 ~ 0.62 |
| 80 | 176 | 0.29 ~ 0.34 |
Engine Coolant Temperature Sensor (ECTS)
x Type: Thermistor type
x Specification
| Temperature | Resistance (kx) | |
| °C | °F | |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 ~ 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 ~ 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |
Throttle Position Sensor (TPS) [integrated into ETC module]
x Type: Hall IC Non-contact sensor type
x Specification
| Throttle angle(°) | Output Voltage (V) | |
| TPS1 | TPS2 | |
| 0 | 0.5 | 4.5 |
| 10 | 0.96 | 4.05 |
| 20 | 1.41 | 3.59 |
| 30 | 1.87 | 3.14 |
| 40 | 2.32 | 2.68 |
| 50 | 2.78 | 2.23 |
| 60 | 3.23 | 1.77 |
| 70 | 3.69 | 1.32 |
| 80 | 4.14 | 0.86 |
| 90 | 4.6 | 0.41 |
| 98 | 4.65 | 0.35 |
| C.T (0) | 0.5 | 4.5 |
| W.O.T (86) | 4.41 | 0.59 |
Crankshaft Position Sensor (CKPS)
x Type: Magnetic field sensitive Type
x Specification
| Item | Specification |
| Coil Resistance (x) | 774 ~ 946 [20°C (68°F)] |
Camshaft Position Sensor (CMPS)
x Type: Hall effect type
Knock Sensor (KS)
x Type: Piezo-electricity type
x Specification
| Item | Specification |
| Capacitance (pF) | 850 ~ 1,150 |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 1]
x Type: Zirconia (ZrO2) [Linear] type
x Specification
| Item | Specification |
| Heater Resistance (x) | 2.4 ~ 4.0 [20°C(69.8°F)] |
Heated Oxygen Sensor (HO2S) [Bank 1/Sensor 2]
x Type: Zirconia (ZrO2) [Binary] type
x Specification
| A/F Ratio (x) | Output Voltage(V) |
| RICH | 0.6 ~ 1.0 |
| LEAN | 0 ~ 0.4 |
| Item | Specification |
| Heater Resistance (x) | Approx. 9.0 [20°C(68°F)] |
Rail Pressure Sensor (RPS)
x Type: Piezo-electricity type
x Specification
Accelerator Position Sensor (APS)
x Type: Variable resistor type
x Specification
| Accelerator Position | Output Voltage (V) | |
| APS1 | APS2 | |
| C.T | 0.7 ~ 0.8 | 0.29 ~ 0.46 |
| W.O.T | 3.85 ~ 4.35 | 1.93 ~ 2.18 |
Fuel Tank Pressure Sensor (FTPS)
x Type: Piezo - Resistivity type
x Specification
| Pressure [kPa (kgf/cmx, in H2O) | Output Voltage (V) |
| -6.67 (-0.068, -26.8) | 0.5 |
| 0 | 2.5 |
| +6.67 (0.068, 26.8) | 4.5 |
| Actuators |
Injector
x Specification
| Item | Specification |
| Coil Resistance (x) | 1.5 [20°C(68°F)] |
ETC Motor [integrated into ETC Module]
x Specification
| Item | Specification |
| Coil Resistance (x) | 0.3 ~ 100 [20°C(68°F)] |
Purge Control Solenoid Valve (PCSV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 22.0 ~ 26.0 [20°C(68°F)] |
CVVT Oil Control Valve (OCV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 9.4 ~ 10.4 [20°C(68°F)] |
Variable Intake Solenoid (VIS) Valve
x Specification
| Item | Specification |
| Coil Resistance (x) | 30.0 ~ 35.0 [20°C(68°F)] |
Fuel Pressure Control Valve
x Specification
| Item | Specification |
| Coil Resistance (x) | 0.5 [20°C(68°F)] |
Ignition Coil
x Type: Stick type
x Specification
| Item | Specification |
| Primary Coil Resistance (x) | 0.75 ± 15%[20°C(68°F)] |
| Secendary Coil Resistance (kx) | 5.9 ± 15%[20°C(68°F)] |
Canister Close Valve (CCV)
x Specification
| Item | Specification |
| Coil Resistance (x) | 19.8 ~ 21.8 [20°C(68°F)] |
| Service Standard |
| Item | Specification | ||
| Ignition Timing (°) | ATDC 5 ± 10 | ||
| Idle Speed (rpm) | A/C OFF | Neutral, N, P-range | 660 ± 100 |
| D-range | 660 ± 100 | ||
| A/C ON | Neutral, N, P-range | 660 ± 100 | |
| D-range | 660 ± 100 | ||
| Tightening Torques |
Engine Control System
| Item | kgf.m | N.m | lb-ft |
| ECM installation nut | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| ECM bracket installation bolt | 2.2 ~ 3.3 | 21.6 ~ 32.4 | 15.9 ~ 23.9 |
| ECM bracket installation nut | 1.0 ~ 1.5 | 9.8 ~ 14.7 | 7.2 ~ 10.9 |
| Manifold absolute pressure sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Engine coolant temperature sensor installation | 3.0 ~ 4.0 | 29.4 ~ 39.2 | 21.7 ~ 28.9 |
| Crankshaft position sensor installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Camshaft position sensor (Bank 1 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Camshaft position sensor (Bank 1 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Knock sensor installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| Heated oxygen sensor (Bank 1 / sensor 1) installation | 4.0 ~ 5.0 | 39.2 ~ 49.1 | 28.9 ~ 36.2 |
| Heated oxygen sensor (Bank 1 / sensor 2) installation | 4.0 ~ 5.0 | 39.2 ~ 49.1 | 28.9 ~ 36.2 |
| Rail pressure sensor installation | 3.0 ~ 3.6 | 30.0 ~ 35.0 | 22.1 ~ 25.8 |
| Electronic throttle body installation bolt | 0.8 ~ 1.0 | 7.8 ~ 9.8 | 5.8 ~ 7.2 |
| Purge control solenoid valve bracket installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Intake) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| CVVT oil control valve (Bank 1 / Exhaust) installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
| Ignition coil installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
Fuel Delivery System
| Item | kgf.m | N.m | lb-ft |
| Fuel tank installation bolt | 4.0 ~ 5.5 | 39.2 ~ 54.0 | 28.9 ~ 39.8 |
| Filler-neck assembly bracket installation bolt | 0.4 ~ 0.6 | 3.9 ~ 5.9 | 2.9 ~ 4.3 |
| Filler-neck assembly installation bolt | 0.8 ~ 1.2 | 7.8 ~ 11.8 | 5.8 ~ 8.7 |
| Accelerator pedal module installation nut | 1.7 ~ 2.6 | 9.8 ~ 14.7 | 7.2 ~ 10.8 |
| Accelerator pedal module installation bolt | 0.9 ~ 1.4 | 8.8 ~ 13.7 | 6.5 ~ 10.1 |
| Delivery pipe installation bolt | 1.9 ~ 2.4 | 18.6 ~ 23.5 | 13.7 ~ 17.4 |
| High pressure fuel pump installation bolt | 1.3 ~ 1.5 | 12.8 ~ 14.7 | 9.4 ~ 10.9 |
| High pressure fuel pipe installation nut | 2.7 ~ 3.3 | 26.5 ~ 32.4 | 19.5 ~ 23.9 |
| High pressure fuel pipe function block installation bolt | 1.0 ~ 1.2 | 9.8 ~ 11.8 | 7.2 ~ 8.7 |
Special Service Tools
Special Service Tools
ItemIllustrationApplicationFuel Pressure Gauge(09353-24100)Measuring the fuel line pressureFuel Pressure Gauge Adapter(09353-02100)Connection between the high pressure fuel ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Parking brake
Always set the parking brake before leaving the vehicle, to apply:
■ Foot type
Firmly depress the brake pedal. Depress the parking brake pedal down as far as
possible.
■ Hand type
Firmly depress the brake pedal. Pull up the parking brake lever as far as possible.
WARNING
To reduc ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Air Temperature Sensor (IATS) Specifications
Specification
TemperatureResistance (kx)°C°F-40-4040.93 ~ 48.35-20-413.89 ~ 16.030325.38 ~ 6.0910503.48 ~ 3.9020682.31 ~ 2.57401041.08 ~ 1.21501221.56 ~ 1.74601400.54 ~ 0.62801760.29 ~ 0.34
...
© 2010-2024 www.htmanual.net
