Hyundai Tucson: Engine Control System / Camshaft Position Sensor (CMPS) Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Control / Fuel System / Engine Control System / Camshaft Position Sensor (CMPS) Description and Operation

Description
Camshaft Position Sensor (CMPS) is a hall sensor and detects the camshaft position by using a hall element.
It is related with Crankshaft Position Sensor (CKPS) and detects the piston position of each cylinder which the CKPS can't detect.
The CMPS is installed on engine head cover and uses a target wheel installed on the camshaft. The Cam Position sensor is a hall-effect type sensor. As the target wheel passes the Hall sensor, the magnetic field changes in the sensor. The sensor then switches a signal which creates a square wave.

Crankshaft Position Sensor (CKPS) Repair procedures
Inspection 1. Check signal waveform of CKPS and CMPS using a GDS. Specification: Refer to “Waveform” Removal 1. Turn the ignition switch OFF and disconnect the battery negative (-) ...

Camshaft Position Sensor (CMPS) Troubleshooting
Signal waveform ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: 75,000 miles (120,000 km) or 60 months
Rotating tires Inspect air cleaner filter Inspect vacuum hose Inspect air conditioning refrigerant Inspect brake hoses and lines Inspect drive shafts and boots Inspect exhaust pipe and muffler Inspect front brake disc/pads, calipers Inspect propeller shaft (AWD) Inspect rear bra ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Schematic Diagrams
Circuit Diagram (1) Circuit Diagram (2) Harness Connector Pin Function (Connector A)Pin Function (Connector A)1Ignition1Pressure side impact sensor [Driver] High2 -2Side impact sensor [Driver] High3Airbag warning lamp3Seat belt pretensioner [Driver] High4(1st stage) Driver ai ...

© 2010-2024 www.htmanual.net