Hyundai Tucson: Engine Electrical System / Starting System

Battery Sensor Repair procedures

Removal 1. Disconnect the battery negative (-) cable. 2. Disconnect the battery sensor connector (A). 3. Remove the battery negative (-) cable after removing the bolt (B). Installation ...

Description and Operation

Description The starting system includes the battery, starter, solenoid switch, ignition switch, inhibitor switch (A/T), clutch pedal switch (M/T), ignition lock switch, connection wires and th ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Panoramaroof Components and Components Location
Components 1. Panoramaroof frame2. Tilt lever assembly3. Glass4. Wind deflector 5. Front fixed glass6. Motor7. Mechanism rail assembly8. Impact cross member assembly9. E.M.C metal sheet10. Sunroof rear rail seal ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Air Temperature Sensor (IATS) Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the IATS connector. 3. Measure resistance between the IATS terminals 3 and 4. 4. Check that the resistance is within the specification. Specification: Refer to “Specification” Removal 1. Turn the ignition swit ...