Hyundai Tucson: Cylinder Head Assembly / Cylinder Head Components and Components Location
| Components |
| 1. Fuel pump adaptor 2. Camshaft bearing cap 3. Camshaft front bearing cap 4. Exhaust camshaft 5. Intake camshaft 6. Exhaust CVVT assembly | 7. Intake CVVT assembly 8. Cam carrier 9. Cylinder head 10. Cylinder head gasket 11. Retainer lock 12. Retainer | 13. Valve spring 14. Valve stem seal 15. Valve 16. Swing arm 17. HLA (Hydraulic lash adjuster) |
Camshaft Repair procedures
Removal
Timing chain cover removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wir ...
Cylinder Head Repair procedures
Removal
Engine removal is not required for this procedure.
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damaging the cylinder head, wait un ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Line Pressure Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve sensor connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Disc Brake Repair procedures
Removal
1.
Remove the front wheel & tire.
Tightening torque :
88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way.
Tightening torque :
21.6 ~ 31.4 N.m (2.2 ~ 3.2 kgf.m, 15.9 ~ 23.1 lb-ft)
3.
R ...
