Replacement |
1. |
Remove the rear wheel & tire.
|
2. |
Loosen the nuts & bolts and then remove the trailing arm (A) with the rear axle.
[2WD]
[4WD] |
3. |
Loosen the mounting bolt and then remove the trailing arm (A) with the frame.
|
4. |
Installation is the reverse of removal. |
Hyundai Tucson (LM) 2010-2015 Service Manual: Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold.
(Refer to Engine Mechanical System - “Intake And Exhaust System”)
3.
Disconnect the knock sensor connector (A).
4.
Remove the installation bolt (B), and then r ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Pressure Control Valve Repair procedures
Inspection
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Disconnect the fuel pressure regulator valve connector.
3.
Measure resistance between the fuel pressure regulator valve terminals 1 and 2.
4.
Check that the resistance is within the specifica ...