Hyundai Tucson: Ignition System / Ignition Coil Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Engine Electrical System / Ignition System / Ignition Coil Repair procedures

Removal

1.	Disconnect the battery nagative terminal.

2.	Remove the engine cover.

Disconnect the ignition coil connectors (A).

•	When removing the ignition coil connector, pull the lock pin (A) and push the clip (B).

4.	Remove the ignition coil (A).

Installation

Install in the reverse order of removal.

Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft)

Inspection

Measure the primary coil resistance between terminals (+) and (-).

Standard value: 0.75x ± 15%

Ignition Coil Schematic Diagrams

Circuit Diagram [M/T] [A/T] ...

Spark Plug Description and Operation

Description A spark plug is a device for delivering electric current from an ignition system to the combustion chamber of a spark-ignition engine to ignite the compressed fuel/air mixture there ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Relay Box (Engine Compartment) Components and Components Location
Component Location ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tools(Number and name)IllustrationUse09431-45100Oil seal installerInstallation of transfer case oil seal.(Right side)09473-3B100Oil seal installerInstallation of transfer case oil seal.(Both side) ...