Removal |
1. |
Remove the windshield wiper arm and blade after removing a nut (B) and wiper cap (A). |
2. |
Remove the windshield wiper arm and blade (A) after removing a nut. |
3. |
If necessary, release the wiper blade fixing clip by pulling up and remove the wiper blade from the inside radius of wiper arm. |
4. |
Remove the weather strip and the cowl top cover (A) after removing retainers. |
5. |
Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly. |
6. |
Remove the windshield wiper motor and linkage assembly (A) after removing 3 bolts. |
7. |
Hold the wiper motor crank arm and remove the upper linkage (A) from the wiper motor crank arm.
|
8. |
Remove the lower linkage (A) from the wiper motor crank arm.
|
9. |
Remove the crank arm (A) after loosening a nut (B). |
10. |
Remove the wiper motor after loosening the 3 screws. |
Installation |
Do not allow the wiper arm to fall against the windshield, since it may chip or crack the windshield. |
1. |
Install the wiper motor. |
2. |
Install the crank arm.
|
3. |
Install the lower and upper linkage to the wiper motor crank arm.
|
4. |
Install the wiper motor and linkage assembly and then connect the wiper motor connector.
|
5. |
Install the cowl top cover. |
6. |
Install the windshield wiper arm and blade.
|
7. |
Install the wiper arm and blade to the specified position (A). |
8. |
Set the cowl top cover on the specified spray position.
|
Inspection |
1. |
Remove the connector (A) from the wiper motor.
|
2. |
Attach the positive (+) lead from the battery to terminal 3 and the negative (-) lead to terminal 4. |
3. |
Check that the motor operates at low or high speed as below table.
|
Hyundai Tucson (LM) 2010-2015 Service Manual: Cluster Ion Generator Description and Operation
Description
1.
The function of cluster ion generator is cleaning air by sterilizing and dissolving of air conditioner.
2.
The function of cluster ion generator is controlling mold caused by stench of air conditioner and external inflow of air.
...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Pressure Control Valve Specifications
Specification
ItemSpecificationCoil Resistance (x)0.5 [20°C(68°F)
...