Removal |
1. |
Disconnect the battery negative cable and wait for at least three minutes before beginning work. |
2. |
Remove the glove box housing. (Refer to the Body group- crash pad). |
3. |
Disconnect the passenger airbag connector and remove the PAB mounting bolt. |
4. |
Remove the crash pad. (Refer to the Body group- crash pad).
|
5. |
Remove the heater duct from the crash pad. |
6. |
Remove the mounting nuts (4EA) from the crash pad. Then remove the passenger airbag.
|
Installation |
1. |
Remove the ignition key from the vehicle. |
2. |
Disconnect the battery negative cable from battery and wait for at least three minutes before beginning work. |
3. |
Place a passenger airbag on the crash pad and tighten the passenger airbag mounting bolts.
|
4. |
Install the heater duct to the crash pad. |
5. |
Install the crash pad. (Refer to the Body group- crash pad) |
6. |
Tighten the passenger airbag mounting bolt.
|
7. |
Connect the passenger airbag harness connector to the SRS main harness connector. |
8. |
Reinstall the glove box. (Refer to the Body group- crash pad) |
9. |
Reconnect the battery negative cable. |
10. |
After installing the passenger airbag (PAB), confirm proper system operation:
|
Hyundai Tucson (LM) 2010-2015 Service Manual: CVVT Oil Control Valve (OCV) Description and Operation
Description
Continuous Variable Valve Timing (CVVT) system advances or
retards the valve timing of the intake and exhaust valve in accordance
with the ECM control signal which is calculated by the engine speed and
load.
By controlling CVVT, the valve over-lap or under-lap occurs,
which m ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Engine Coolant Temperature Sensor (ECTS) Description and Operation
Description
Engine Coolant Temperature Sensor (ECTS) is located in the
engine coolant passage of the cylinder head for detecting the engine
coolant temperature. The ECTS uses a thermistor that changes resistance
with the temperature.
The electrical resistance of the ECTS decreases as the
...