Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the solenoid valve connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification. |
Removal |
Replacing an on/off solenoid valve (SS-A, SS-B) does not
require additional hydraulic pressure adjustment; however, the hydraulic
pressure will need to be adjusted after replacing the VFS solenoid
valve. If replacing the VFS solenoid valve; also replace the valve body
assembly.
(Refer to Hydraulic system - "Valve Body") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Occupant Classification System (OCS)
Your vehicle is equipped with an Occupant Classification System (OCS) in the
front passenger's seat.
The OCS is designed to detect the presence of a properly-seated front passenger
and determine if the passenger's front air bag should be enabled (may inflate) or
not. The driver's front ai ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Engine Coolant Temperature Sensor (ECTS) Schematic Diagrams
Circuit Diagram
(M/T)
(A/T)
...