Hyundai Tucson: Light bulbs / High mounted stop light
1. Open the tailgate.
2. Gently remove the center cover of the rear tailgate trim.
3. Disconnect the electrical connector.
4. Loosen the retaining nuts and remove the spoiler.
5. Remove the high mounted stop light assembly (A) after loosening the nuts and washer nozzle (B).
6. Reinstall a new light assembly in the reverse order of removal.
Inside light
Tail light and Back-up light
1. Open the tailgate.
2. Remove the service cover using a flat-blade screwdriver.
3. Remove the socket from the assembly by turning the socket counterclockwise
un ...
License plate light bulb replacement
1. Loosen the lens retaining screws with a philips head screwdriver.
2. Remove the lens.
3. Remove the bulb by pulling it straight out.
4. Install a new bulb.
5. Reinstall the lens securely wi ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Parking Brake Assembly Repair procedures
Removal
Parking Brake Pedal [Foot type]
1.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad")
2.
Remove the junction box.
(Refer to Body Electrical System - "Fuses and Relays")
3.
Disconnect the parking brake switch connector (A).
4.
Remove the parking brake pedal mou ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Alternator Description and Operation
Description
The Alternator has eight built-in diodes, each rectifying AC current to DC current.
Therefore, DC current appears at alternator "B" terminal.
In addition, the charging voltage of this alternator is regulated by the battery voltage detection system.
The alternator is regulated by th ...
