Hyundai Tucson: Hydraulic System / Oil Pump Components and Components Location
| Components |
| 1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal | 6. Bushing-housing 7. Reaction shaft 8. Bushing-reaction shaft 9. Sleeve 10. Flange bolt |
| 1. Inhale (Oil filter) 2. Inhale (Valve body) 3. Outlet 4. 26/B operation pressure | 5. 35R/C operation pressure 6. Lubrication 7. Lock up clutch operation pressure 8. Lock up clutch cancellation |
Oil Pump Description and Operation
Description
The oil pump is built-in as a single unit with the 2/6 brake
chamber. Rotation of the pump builds the hydraulic pressure needed for
the lubrication of the various parts of the trans ...
Fluid Components and Components Location
Components Location
1. Injection hole (eyebolt)2. Oil level plug3. Oil drain plug
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Clutch Release Cylinder Repair procedures
Removal
1.
Drain the brake fluid through the bleed plug (A).
2.
Remove the clutch release cylinder assembly (C) after removing thd tube (B) and bolts (A-2ea).
Installation
1.
Installation is the reverse of removal.
Coat the clutch clevis push rod specified grea ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Starter Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes ...
