Hyundai Tucson: Lighting System / Hazard Lamp Switch Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Lighting System / Hazard Lamp Switch Repair procedures

Removal

1.	Disconnect the negative (-) battery terminal.

2.	Remove the hazard lamp switch assembly. (Refer to the BE group - "Audio head unit")

3.	Disconnect the hazard lamp switch connector (A).

4.	If the hazard lamp switch is not as specified, replace it carefully and take care not to damage the hook (A).

Installation

1.	Connect the hazard switch connector.

2.	Install the hazard switch assembly.

Inspection

1.	Operate the switch and check for continuity between terminals with an ohmmeter.

Overhead Console Lamp Repair procedures

Inspection Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.Removal 1. Disconnect th ...

Rheostat Repair procedures

Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to the BD group - "Crash pad") 3. Remove the crash pad side switch assembly (A) as ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Relay Box (Engine Compartment) Components and Components Location
Component Location ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Bluetooth® Wireless Technology AUDIO
What is Bluetooth® Wireless Technology? Bluetooth® Wireless Technology allows devices to be connected in a short distance, including hands-free devices, stereo headsets, wireless remote controllers, etc. For more information, visit the Bluetooth® Wireless Technology website at www.Bluetoot ...