Hyundai Tucson: Electro chromic Inside Rear View Mirror / Repair procedures

Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cover the forward facing sensor.
3.
Head a light to the rearward looking sensor.
4.
The ECM should be darkened as soon as the rearward looking sensor detects the light.
   
If this test is performed in daytime, the ECM may be darkened as soon as the forward facing sensor is covered.
5.
When the reverse gear is engaged, the ECM should not be darkened.
When heading lights to both the forward facing and rearward looking sensors, the ECM should not be darkened.
Removal
1.
Remove the mirror wiring cover (A).

2.
Remove the mirror mounting screw (A) and connector (B).

3.
Remove the mirror (A) pulling up in the arrow direction.
   
Make sure not to damage the mounting bracket when removing the mirror.

Installation
1.
Install the mirror making sure the mounting bracket not to be damaged.
2.
Install the mirror wiring cover after reconnecting the connector and tightening the screw.
Description and Operation
Description The ECM (Electro Chromatic inside rear view Mirror) is for dimming the reflecting light from a vehicle behind at night, in order the user not to be dazzled by the light. The forward ...

Compass Mirror Description and Operation
Description The compass feature is designed to be integrated into an electro chromic interior rearview mirror. The mirror assembly shall display a compass heading. The compass mirror then take th ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Fuel Gauge
This gauge indicates the approximate amount of fuel remaining in the fuel tank. ✽ NOTICE The fuel tank capacity is given in chapter 8. The fuel gauge is supplemented by a low fuel warning light, which will illuminate when the fuel tank is nearly empty. On inclines or curves, the fu ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Before starting
Make sure the hood, the tailgate, and the doors are securely closed and locked. Adjust the position of the seat and steering wheel. Adjust the inside and outside rearview mirrors. Verify all the lights work. Fasten your seatbelt. Check that all passengers have fastened their seatbelts. ...

© 2010-2024 www.htmanual.net