Hyundai Tucson: Interior / Console Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body (Interior and Exterior) / Interior / Console Repair procedures

Replacement

[M/T]

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Using a screwdriver, remove the knob (A) and boots (B).

2.	Using a screwdriver, remove the floor console tray (A).

3.	Using a screwdriver, remove the floor console bezel (A).

4.	Disconnect the connectors (A).

5.	Using a screwdriver, remove the console upper cover (A).

6.	Disconnect the connector (A).

7.	Remove the console tray mat (A).

8.	Remove the extension side cover (A).

9.	After loosening the mounting bolts and screws, then remove the floor console assembly (A).

[A/T]

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the knob (A).

2.	Using a screwdriver, remove the floor console tray (A).

3.	Using a screwdriver, remove the floor console bezel (A).

4.	Disconnect the connectors (A).

5.	Using a screwdriver, remove the console upper cover (A).

6.	Disconnect the connector (A).

7.	Remove the console armrest tray (A).

8.	Remove the console tray mat (A).

9.	Remove the extension side cover (A).

10.	After loosening the mounting bolts and screws, then remove the floor console assembly (A).

11.

Install in the reverse order of removal.

•	Make sure the connector is plugged in properly.

•	Replace any damage clips.

Console Components and Components Location

Components [A/T] 1. Floor console2. Console upper cover (AT)3. Floor console tray4. Floor console bezel5. Extension side cover ...

Crash Pad Components and Components Location

Components 1. Main crash pad assembly2. Center fascia upper panel3. Cluster fascia panel4. Cluster fascia lower panel5. Crash pad side cover6. Shrouds upper panel 7. Shrouds lower panel 8. Air ve ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Seat Belt – Passenger’s 3-point system with combination locking retractor
This type of seat belt combines the features of both an emergency locking retractor seat belt and an automatic locking retractor seat belt. Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Oil Pan Repair procedures
Removal 1. Remove the under covers. (Refer to Engine and transaxle assembly) 2. Drain engine oil. 3. Remove the oil pan (A). (1) Unfasten the bolts. (2) Insert the blade of SST (09215-3C000) between the lower crankcase and the oil pan. Separate the applied sealer and remove the ...