Hyundai Tucson: Automatic Transaxle Control System / Shift Lever Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Repair procedures

Removal

1.	Pull the knob (A) in the direction of "F" and remove it, and then remove the console upper cover.

2.	Remove the console. (Refer to Body - "Floor console")

3.	Disconnect the connector (A) from the shift lever.

4.	Disconnect the shift cable (A) from the shift lever.

Remove the shift lever (A) after removing the bolts.

Tightening torque:

8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Installation

Installation is the reverse of removal.

When installing, set room side Shift lever and T/M side manual control lever to N position.

Shift Lever Components and Components Location

Components 1. Shift lever knob 2. Shift lever assembly3. Shift cable4. Manual control lever5. Shift cable retainer ...

Shift Cable Components and Components Location

Components 1. Shift lever knob 2. Shift lever assembly3. Shift cable4. Manual control lever5. Shift cable retainer ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Water Temperature Control Assembly Repair procedures
Removal and Installation 1. Drain engine coolant so its level is below water temperature control assembly. 2. Remove the air cleaner assembly. (Refer to Engine transaxle assembly in this group) 3. Disconnect the radiator upper hose (A). 4. Disconnect the heater hose (A). ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
Adjustment TCM Learning When shift shock is occurred or parts related with the transaxle are replaced, TCM learning should be performed. In the following case, TCM learning is required. • Transaxle assembly replacement • TCM replacement • TCM upgrading 1. TCM l ...