Removal |
1. |
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line") |
2. |
Remove the rear seat.
(Refer to Body - “Seat”) |
3. |
Remove the fuel pump service cover (A). |
4. |
Disconnect the fuel pump connector (A) and the fuel tank pressure sensor connector (B). |
5. |
Disconnect the fuel feed tube quick connector (C) and the vapor tube quick-connector (D). |
6. |
Remove locking ring (A) by using the special service tool (B) [No.:09310-2S200].
|
7. |
Remove the fuel pump from the fuel tank. |
Installation |
1. |
Install in the reverse order of removal.
|
Hyundai Tucson (LM) 2010-2015 Owners Manual: If you decide to pull a trailer?
Here are some important points if you decide to pull a trailer:
Consider using a sway control.You can ask a trailer hitch dealer about sway
control.
Do not do any towing with your vehicle during its first 1,200 miles (2,000
km) in order to allow the engine to properly break in. Failure t ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Interior rearview mirrors
Before you start driving, adjust the rearview mirror to the center on the view
through the rear window.
WARNING
Make sure your line of sight is not obstructed. Do not place objects in the
rear seat, cargo area, or behind the rear headrests which could interfere with your
vision through the r ...