Hyundai Tucson: Air Conditioning System / In car sensor Repair procedures

Inspection
1.
Ignition "ON"
2.
Blow air with changing temperature to the in car sensor air inlet. Measure sensor resistance between 1 and 2 terminals.

1. Sensor Ground
2. Incar Sensor Signal

Specification
Temperature [°C(°F)]
Resistance between terminals 1and 2 (kx)
-20(-4)
290.21
-10(14)
165.6
0 (32)
97.83
10(50)
59.67
20(68)
37.48
30(86)
24.17
40(104)
15.98
50(122)
10.81

   
In car sensor is negative type thermistor that resistance will rise with lower temperature, and reduce with higher temperature.
Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the right center air vent and then disconnect the incar sensor connector (A).

3.
Remove the incar sensor (B) from center air vent.

4.
Install in the reverse order of removal.
In car sensor Description and Operation
Description 1. In-car air temperature sensor is located at the center facia lower panel. 2. The sensor contains a thermistor which measures the temperature of the inside. The signal decided ...

Photo Sensor Description and Operation
Description 1. The photo sensor is located at the right of defrost nozzle. 2. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its lig ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Thermostat Troubleshooting
Troubleshooting SymptomsPossible CausesRemedyCoolant leakage • From the thermostat gasket Check the mounting bolts • Check the torque of the mounting bolts • Retighten the bolts and check leakage again. Check the gasket for damage • Check gasket or seal for damage ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Smart key
To lock the doors, press the button on the outside door handle while carrying the smart key with you or press the door lock button on the smart key. Press the button on the outside door handle while carrying the smart key with you or press the door unlock button on the smart key, the driver†...

© 2010-2024 www.htmanual.net