Inspection |
1. |
Ignition "OFF". |
2. |
Disconnect evaporator temperature sensor. |
3. |
Using the multi-tester, Measure resistance between terminal "1" and "2" of evaporator temperature sensor.
Specification
|
Replacement |
1. |
Remove the console extension cover (A). |
2. |
Remove the left side cover (A). |
3. |
Remove the crash pad lower cover (A). |
4. |
Disconnect the diagnosis connector (A). |
5. |
Remove the reinforcing panel (A). |
6. |
Remove the shower duct (A). |
7. |
Remove the evaporator temperature sensor (A), by pulling it after rotating 90° in a counterclockwise direction. |
8. |
Install in the reverse order of removal. |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Floor mat anchor(s)
ALWAYS use the Floor Mat Anchors to attach the front floor mats to the vehicle.
The anchors on the front floor carpet keep the floor mats from sliding forward.
Your vehicle was manufactured with driver's side floor mat anchors designed to
securely hold the floor mat in place. To avoid any i ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Battery Components and Components Location
Components
1. Battery insulation pad2. Battery3. Battery tray4. Battery mounting bracket
...