Inspection |
1. |
Disconnect the battery negative terminal. |
2. |
Remove the fuse box cover. |
3. |
Remove the starter relay (A). |
4. |
Using an ohmmeter, check that there is continuity between each terminal.
|
5. |
Apply 12V to terminal 85 and ground to terminal 86.
Check for continuity between terminals 30 and 87.
|
6. |
If there is no continuity, replace the starter relay. |
7. |
Install the starter relay. |
8. |
Install the fuse box cover. |
Hyundai Tucson (LM) 2010-2015 Service Manual: Heater Core Repair procedures
Replacement
1.
Remove the crash pad.
(Refer to Heater - "Heater Unit")
2.
Loosen the mounting screw and then remove the heater core cover (A).
3.
Remove the heater core.
4.
Be careful that the inlet and outlet pipe are not bent during heater core removal, and pull out the heater co ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and the battery cable.
When the ignition key is turned to the start position, current flows and energizes ...