Removal |
In case of removing the high pressure fuel pump, high
pressure fuel pipe, delivery pipe, and injector, there may be injury
caused by leakage of the high pressure fuel. So don’t do any repair
work right after engine stops.
|
1. |
Turn the ignition switch OFF and disconnect the battery negative (-) cable. |
2. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - "Release Residual Pressure in Fuel Line")
|
3. |
Remove the air cleaner and the air intake hose. (Refer to Engine Mechanical System - "Air Cleaner") |
4. |
Remove the pump foam (A). |
5. |
Disconnect the fuel pressure control valve connector (A). |
6. |
Disconnect the fuel feed tube quick-connector (A) with a clip removing tool.
|
7. |
Remove the high pressure fuel pipe.
|
8. |
Remove the installation bolts (E), and then remove the high pressure fuel pump from the cylinder head assembly.
|
Installation |
|
|
|
|
|
|
|
|
1. |
Install in the reverse order of removal.
|
Hyundai Tucson (LM) 2010-2015 Owners Manual: Instrument Cluster Control
Adjusting Instrument Cluster Illumination
When the vehicle's parking lights or headlights are on, press the illumination
control button to adjust the brightness of the instrument panel illumination.
The brightness of the instrument panel illumination is displayed.
If the brightness ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.
...