Hyundai Tucson: Manual Transaxle Control System / Shift Lever Repair procedures

Removal
1.
Remove the center console.
(Refer to "Console" in BD group)
2.
Remove the snap pin (A) and the clip (B).

3.
Remove the clip (A) and then remove the shift cable assembly.

4.
Remove the shift lever assembly (A).

Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

5.
Installation is the reverse of removal.
   
When installing, set room side shift lever and T/M side lever to "Neutral" position.
When installing, adjust the Control cable.
(Refer to "Control Cable adjustment procedure" in this group.)
Shift Lever Components and Components Location
Components 1. Shift lever knob2. Shift lever assembly3. Select cable assembly4. Shift cable assembly ...

Control Cable Components and Components Location
Components 1. Shift lever knob2. Shift lever assembly3. Select cable assembly4. Shift cable assembly ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Side Impact Sensor (SIS) Repair procedures
Removal Pressure Side Impact Sensor     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connector(s), disconnect the side airbag connector(s). • Do not t ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Installing a Child Restraint System (CRS)
WARNING Before installing your child restraint system always: Read and follow the instructions provided by the manufacturer of the child restraint. Read and follow the instructions regarding child restraint systems in this manual. Failure to follow all warnings and instructions could in ...

© 2010-2024 www.htmanual.net