Hyundai Tucson: Body Electrical System / Smart Key System
- Specifications
- Components and Components Location
- Description and Operation
- Smart Key Repair procedures
- Smart Key Unit Components and Components Location
- Smart Key Unit Schematic Diagrams
- Smart Key Unit Repair procedures
- Smart Key Diagnostic Repair procedures
Troubleshooting
Troubleshooting Guide
Before Thinking The Product Has Malfunctioned
1.
Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. ...
Specifications
Specifications
Smart Key Unit
ItemsSpecificationRated voltageDC 12VOperating voltageDC 9 ~ 16VOperating temperature-22°F ~ 167°F (-30°C ~ 75°C)LoadMax. 5mA (When welcome light function off)
...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Repair procedures
General Inspection
After or before servicing the EPS system, perform the
troubleshooting and test procedure as follows. Compare the system
condition with normal condition in the table below and if abnormal
symptom is detected, perform necessary remedy and inspection.
Test conditionNormal ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Underdrive Brake Control Solenoid Valve(UD/B_VFS) Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the solenoid valve connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the resistance is within the specification.
Removal
Replacing an on/off soleno ...
