Hyundai Tucson: Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Line Pressure Control Solenoid Valve Description and Operation

Description

line pressure control solenoid valve is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the line pressure.

26 Brake Control Solenoid Valve(26/B_VFS) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Line Pressure Control Solenoid Valve Specifications

Specifications Direct control VFS[LINE Pressure] x Control type : Normal high type Control Pressure kpa (kgf/cmx, psi)500.14 ~ 9.81(5.1 ~ 0.1,72.54 ~ 1.42)Current value(mA)50 ~ 850 Intern ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: 4WD ECU Flow Diagram
Power Flow Diagram 4WD ECU Input&Output Diagram ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Accelerator Position Sensor (APS) Repair procedures
Inspection 1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output voltage of the APS 1 and 2 at C.T and W.O.T. Specification: Refer to “Specification” Removal 1. Turn the ignition switch OFF and disconnect the negative ...