Kia Sportage: Rail Pressure Sensor (RPS): Description and Operation - Engine Control System - Engine Control / Fuel System - Kia Sportage SL Service & Repair ManualKia Sportage: Rail Pressure Sensor (RPS): Description and Operation

Third generation SL (2010Ц2016) / Kia Sportage SL Service & Repair Manual / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS): Description and Operation

Description
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control correct injection amount and timing and adjusts the fuel pressure with the fuel pressure regulator valve if the target pressure and the actual pressure calculated by the RPS output signal are different.

Heated Oxygen Sensor (HO2S): Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 4 and 5 [B1/S1]. 4. Measure resistance between the HO2S t ...

Rail Pressure Sensor (RPS): Specifications
Specification ...

Other Information:

Crash Pad: Repair procedures
Replacement Cluster Replacement     Х When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, ...

Components and Components Location
Component Location 1. Slide motor2. Rear height motor3. Reclining motor4. Power seat switch5. Reclining switch6. Lumbar support switch7. Lumbar support motor ...

Categories

Copyright © www.htmanual.net 2014-2018