Hyundai Tucson: Horn / Components and Components Location

Component Location

1. Horn switch
2. Horn relay (Engine room compartment)
3. Horn (Low pitch)
4. Clock spring

Horn
...

Repair procedures
Removal 1. Remove the front bumper. (Refer to the BD group - "Front bumper") 2. Remove the bolts and disconnect the horn connectors, then remove the low pitch horn (A). Installation 1. I ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Rail Pressure Sensor (RPS) Description and Operation
Description Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor converts the pressure to voltage signal. By using this signal, the ECM can control co ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Ultrasonic Sensor Repair procedures
Removal 1. Remove the rear bumper. (Refer to the BD group - "Rear bumper") 2. Disconnect the sensor connector (A) inside the rear bumper. 3. Pull out the sensor (A) by opening the sensor holder (B) out. Installation 1. Connect the connector, and then reassemble the sensor. 2. I ...

© 2010-2024 www.htmanual.net