Hyundai Tucson: Horn / Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Body Electrical System / Horn / Repair procedures

Removal

1.	Remove the front bumper. (Refer to the BD group - "Front bumper")

2.	Remove the bolts and disconnect the horn connectors, then remove the low pitch horn (A).

Installation

1.	Install the horns after connecting the horn connectors.

2.	Install the front bumper.

Inspection

Test the horn by connecting battery voltage to the 1 terminal and ground the 2 terminal.

The horn should make a sound. If the horn fails to make a sound, replace it.

Horn Relay Inspection

1.	Remove the horn relay (A) from the engine room relay box.

2.	There should be continuity between the No.30 and No.87 terminals when power and ground are connected to the No.85 and No.86 terminals.

3.	There should be no continuity between the No.30 and No.87 terminals when power is disconnected.

Adjustment

Operate the horn, and adjust the tone to a suitable level by turning the adjusting screw.

Horn adjustment screw is automatically sealed with silicon sealant.

The shape and size of the applied sealant is variable and tails or dribbles are acceptable and not to be tampered with.

Components and Components Location

Component Location 1. Horn switch2. Horn relay (Engine room compartment)3. Horn (Low pitch)4. Clock spring ...

AVN System

...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Cargo security screen (if equipped)
Use the cargo security screen to hide items stored in the cargo area. To use the cargo security screen: 1. Pull the cargo security screen towards the rear of the vehicle by the handle. 2. Insert the guide pin into the guide. When the cargo security screen is not in use: 1. Pull the carg ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Instrument Cluster Components and Components Location
Components (1) Components (2) ...