| Removal |
| 1. |
Remove the rear bumper.
(Refer to the BD group - "Rear bumper") |
| 2. |
Disconnect the sensor connector (A) inside the rear bumper.
|
| 3. |
Pull out the sensor (A) by opening the sensor holder (B) out.
|
| Installation |
| 1. |
Connect the connector, and then reassemble the sensor. |
| 2. |
Install rear bumper. |
Ultrasonic Sensor Components and Components Location
Buzzer Repair proceduresHyundai Tucson (LM) 2010-2015 Service Manual: Master Cylinder Repair procedures
Removal
1.
Turm ignition switch OFF and disconnect the negative (-) battery cable.
2.
Disconnect the battery positive terminal and them remove the battery.
3.
Disconnect the ECM connector and the ECM and battery tray.
4.
Disconnect the brake fluid level switch connector (A), and remo ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Fuel Tank Repair procedures
Removal
1.
Release the residual pressure in fuel line.
(Refer to Fuel Delivery System - "Release Residual Pressure in Fuel Line")
2.
Remove the rear seat cushion.
(Refer to Body - “Seat”)
3.
Remove the fuel pump service cover (A).
4.
Disconnect the fuel pump connector (A) and ...