Hyundai Tucson: Automatic Transaxle Control System / Inhibitor Switch Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Inhibitor Switch Description and Operation

Description

Inhibiter Switch contains two contact points. One of these points connects the engine startup when the lever is in the N or P position and turns on the reverse lights. The other contact point monitors the lever's position (PRND) and is used to control gear setting signals.

SS-B Solenoid Valve(ON/OFF) Repair procedures

Inspection 1. Turn ignition switch OFF. 2. Disconnect the solenoid valve connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the ...

Inhibitor Switch Specifications

Specifications x Type: Combination of output signals from 4 terminals Power supply (V)12Output typePin to Pin Signal Code Table PP-RRR-NNN-DDS112V12V00000S2012V12V12V000S300012V12V12V0S ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Electric chromic mirror (ECM) with compass and HomeLink® system (if equipped)
Your vehicle may be equipped with a Gentex Automatic-Dimming Mirror with a Z-Nav™ Electronic Compass Display and an Integrated HomeLink® Wireless Control System. During nighttime driving, this feature will automatically detect and reduce rearview mirror glare while the compass indicates the ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Oil Pump Description and Operation
Description The oil pump is built-in as a single unit with the 2/6 brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converte ...