Hyundai Tucson: Air Conditioning System / Ambient Sensor Description and Operation
| Description |
| 1. |
The ambient temperature sensor is located at the front of the
condenser and detects ambient air temperature. It is a negative type
thermistor; resistance will increase with lower temperature, and
decrease with higher temperatures. |
| 2. |
The sensor output will be used for discharge temperature
control, temperature regulation door control, blower motor level
control, mix mode control and in-car humidity control.
|
Photo Sensor Repair procedures
Inspection
1.
Ignition "ON"
2.
Using the scan tool.
3.
Emit intensive light toward photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher ...
Ambient Sensor Repair procedures
Inspection
1.
Ignition "OFF"
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of ambient temperature sensor between
terminals 1 and 2 whether it is changed by changing o ...
Other information:
Hyundai Tucson (LM) 2010-2015 Service Manual: Front Driveshaft Components and Components Location
Components
[THETA II 2.4 2WD]
1. Driveshaft (LH)2. Driveshaft (RH)
[NU 2.0 / THETA II 2.4 4WD]
1. Driveshaft (LH)2. Inner shaft bearing bracket3. Driveshaft (RH)
Components
[LH]
1. BJ assembly2. Clip 3. BJ boot band4. BJ boot5. Dynamic damper band6. Dynamic damper7. Shaft8. ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Underbody maintenance
Corrosive materials used for ice and snow removal and dust control may collect
on the underbody. If these materials are not removed, accelerated rusting can occur
on underbody parts such as the fuel lines, frame, floor pan and exhaust system,
even though they have been treated with rust protec ...
