Hyundai Tucson: Body Electrical System / Ignition Switch Assembly
Start/Stop Button Repair procedures
Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the left air vent.
(Refer to the BD group - "Crash pad")
3.
Disconnect the connector (A).
[LHD]
[RHD]
4.
Remove th ...
Repair procedures
Inspection
1.
Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column.
2.
Check for continuity between the terminals.
3.
If continu ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Wheel alignment and tire balance
The wheels on your vehicle were aligned and balanced carefully at the factory
to give you the longest tire life and best overall performance.
In most cases, you will not need to have your wheels aligned again. However,
if you notice unusual tire wear or your vehicle pulling one way or the other ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Intake Air Temperature Sensor (IATS) Description and Operation
Description
Intake Air Temperature Sensor (IATS) is included inside
Manifold Absolute Pressure Sensor and detects the intake air
temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM ...
