Removal |
|
1. |
Using a screwdriver or remover, then remove the crash pad passenger panel (A).
(Refer to the BD group - "Crash pad") |
2. |
Remove the SPAS unit (A) after removing the nuts (2EA) and disconnecting the connectors. |
Installation |
1. |
Connect the connectors and install the SPAS unit (A). |
2. |
Install the crash pad passenger panel. |
Inspection |
1. |
The SPAS (Smart Parking Assist System) can diagnose by using the GDS more quickly.
The SPAS communicates with the GDS and then reads the input/output value and drives the actuator. |
2. |
To diagnose the SPAS (Smart Parking Assist System) function, select the menu of model and SPAS. |
3. |
To consult the present input/output value of SPAS, "Current DATA". It provides information of SPAS input/output conditions. |
4. |
To perform compulsory operation on SPAS input factors, select "ACTUATION TEST". |
5. |
To check the DTC of the each module, select "DIAGNOSTIC TROUBLE CODES" |
6. |
After replacing the SPAS unit, perform the "SPAS Variant Coding" procedure with GDS. |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Front seats
WARNING
Take the following precautions when adjusting your seat:
NEVER attempt to adjust the seat while the vehicle is moving. The seat
could respond with unexpected movement and may cause loss of vehicle control
resulting in an accident.
Do not place anything under the front seats. Loo ...
Hyundai Tucson (LM) 2010-2015 Owners Manual: Windshield defrosting and defogging
WARNING
Windshield heating
Do not use the or
position during cooling operation in
extremely humid weather. The difference between the temperature of the outside air
and the windshield could cause the outer surface of the windshield to fog up, causing
loss of visibility. In this case, ...