Hyundai Tucson: Steering wheel / Heated Steering wheel Repair procedures

Hyundai Tucson (LM) 2010-2015 Service Manual / Steering System / Steering wheel / Heated Steering wheel Repair procedures

Repair Procedures

Measure a resistance of NTC and Heated pad.

A.	NTC resistance(Black / Yellow, Black) - 9.0 kx ~ kx (25°C)

B.	Heated pad resistance (Yellow, Black) - 1.4 ~ 1.8 x ± 10%

Measure a temperature.

A.	The temperature of wheel surface grip must rise from -20°C to 20°C within 6 minute

B.	The temperature of wheel surface grip must keep 38°C ± 4°C after 25 minute

C.	At that time switch on, all measure point (1~8)

Removal

[Heated steering switch]

1.	Turn ignition switch OFF and disconnect the negative (-) battery cable.

2.	Remove the crash pad side switch assembly. (Refer to Body - "Crash Pad Lower Panel")

3.	Check the continuity between the switch terminals as the heated steering switch is engaged.

Heated Steering wheel Schematic Diagrams

Schematic Diagram 1. Teminals 2. Teminal function ConnectorNoSignalColorA1GNDBlack2BattaryRed3SwitchWhite4LEDGreen ConnectorNoSignalColorB1HeaterYellow2NTCBlack/Red3GNDBlack 3. S ...

Electric Power Steering

...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Occupant Classification System (OCS)
Your vehicle is equipped with an Occupant Classification System (OCS) in the front passenger's seat. The OCS is designed to detect the presence of a properly-seated front passenger and determine if the passenger's front air bag should be enabled (may inflate) or not. The driver's front ai ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle. It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway. To turn the hazard warni ...