Inspection |
1. |
Press the OFF switch more then 4 times within 2 seconds while pressing the MODE switch.
* Diagnostic procedure refer to DTC code.
|
Replacement |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the extension cover (A). |
3. |
Disconnect the damper (A) from the glove box (B). |
4. |
Remove the glove box lift (A). |
5. |
Disconnect the pine (A), then remove the glove box (B). |
6. |
Remove the crash pad passenger panel (A). |
7. |
Remove the glove box housing (A). |
8. |
Remove the shower duct (A). |
9. |
Loosen the screws and then remove the cluster ionizer (A). |
10. |
Install in the reverse order of removal. |
Hyundai Tucson (LM) 2010-2015 Service Manual: Description and Operation
Description
The ECM (Electro Chromatic inside rear view Mirror) is for
dimming the reflecting light from a vehicle behind at night, in order
the user not to be dazzled by the light. The forward facing sensor
detects brightness of the surroundings, while the rearward looking
sensor the str ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Input Speed Sensor Troubleshooting
Signal Waveform
Fig 1) Input/Output speed sensor at low speed
Fig 2) Input/Output speed sensor at high speed ...