Hyundai Tucson: ESC(Electronic stability system) System / DBC Switch Repair procedures
| Inspection |
| 1. |
Turn ignition switch OFF and disconnect the negative (-) battery cable. |
| 2. |
Remove the crash pad side switch assembly.
(Refer to Body - "Crash Pad")
|
| 3. |
Check the continuity between the switch terminals as the DBC switch is engaged.
|
DBC Switch Description and Operation
Description
The DBC function is the acronym word of Downhill Brake
Control function. When a vehicle goes down the hill, just pushing the
DBC switch enables the car to keep its vehicle's speed a ...
Steering Angle Sensor Description and Operation
Description
The Steering Angle Sensor (SAS) is installed in EPS (Electric
Power Steering) and it sends messages to HECU through CAN communication
line.
The SAS is used to determine turning dir ...
Other information:
Hyundai Tucson (LM) 2010-2015 Owners Manual: Cigarette lighter (if equipped)
To use the cigarette lighter, the ignition switch must be in the ACC position
or the ON position.
To open the cover, press the cover and it will slowly open. Then push the cigarette
lighter all the way into its socket. When the element has heated, the lighter will
pop out to the “readyâ ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negative cable from the battery.
3.
Recover the refrigerant with a recovery/charging station.
4.
Loo ...
