Hyundai Tucson: Brake System / Brake Line Repair procedures

Removal
1.
Disconnect the brake fiuid level switch connector, and remove the reservoir cap.
2.
Remove the brake fluid from the master cylinder reservior with a syringe.
   
Do not spill brake fluid on the vehicle, it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
3.
Remove the wheel & tire.
4.
Remove the brake hose clip (A).
[Front]

[Rear]

5.
Disconnect the brake tube by loosening the tube flare nut (B).

Tightening torque:
12.7 ~16.7 N.m (1.3 ~1.7 kgf.m, 9.4 ~12.3 lb-ft)

6.
Disconnect the brake hose from the brake caliper by loosening the bolt (C).

Tightening torque:
24.5 ~29.4 N.m (2.5 ~3.0 kgf.m, 18.1 ~21.7 lb-ft)

[Front]

[Rear]

Inspection
1.
Check the brake tubes for cracks, crimps and corrosion.
2.
Check the brake hoses for cracks, damage and fluid leakage.
3.
Check the brake tube flare nuts for damage and fluid leakage.
4.
Check brake hose mounting bracket for crack or deformation.
Installation
1.
Installation is the reverse of removal.
   
Use a new washer (A) whenever installing.

2.
After installation, bleed the brake system.
(Refer to Brake system bleeding)
3.
Check the spilled brake oil.
Brake Line Components and Components Location
Components ...

Brake Pedal Components and Components Location
Components 1. Cowl bracket2. Brake pedal member assembly3. Stop lamp switch4. Return spring5. Brake pedal stopper6. Clevis pin7. Snap pin8. Brake pedal ...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Transaxle Control Module (TCM) Description and Operation
Description Transaxle Control Module (TCM) is the automatic transmission's brain. The module receives and processes signals from various sensors and implements a wide range of transmission controls to ensure optimal driving conditions for the driver. TCM is programmed for optim ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Compass Mirror Description and Operation
Description The compass feature is designed to be integrated into an electro chromic interior rearview mirror. The mirror assembly shall display a compass heading. The compass mirror then take the sensor information to determine static field strengths and rotating field information to deter ...

© 2010-2024 www.htmanual.net