Removal |
1. |
Turn the ignition switch OFF. |
2. |
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a spanner.
[LHD]
[RHD] |
3. |
Pull up the lock of the HECU connector , then disconnect the connector. |
4. |
Loosen the HECU bracket bolts (A) and nut (B), then remove HECU and bracket.
[LHD]
[RHD]
|
5. |
Remove the 3 bolts, then remove the bracket from HECU.
|
Installation |
1. |
Installation is the reverse of removal. |
2. |
Tighten the HECU mounting bolts and nuts to the specified torque. |
3. |
After installation, bleed the brake system.
(Refer to ABS bleeding)
|
4. |
Variant coding.
2WD and 4WD vehicle are sharing the HECU each other. To apply appropriate vehicle, HECU needs to variant coding process.
Variant coding process is necessary when :
Perform the Variant coding. |
5. |
Perform the Longitudinal Sensor Calibration.
(Refer to ESC (Electronic stability system) - "Longitudinal G Sensor") |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Interior overview
1. Door lock/unlock button
2. Power window switches
3. Central door lock switch
4. Power window lock switch
5. Outside rearview mirror control switch
6. Fuel filler door release lever
7. Instrument panel illumination control switch
8. AWD Lock button
9. DBC button
10. ESC OFF button
11. ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Output Speed Sensor Repair procedures
Inspection
1.
Check signal waveform of Input & output speed sensor using the GDS.
Specification: Refer to "Signal Wave Form" section.
Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed sensor conn ...