Hyundai Tucson: ESC(Electronic stability system) System / DBC Switch Description and Operation

Hyundai Tucson (LM) 2010-2015 Service Manual / Brake System / ESC(Electronic stability system) System / DBC Switch Description and Operation

Description

The DBC function is the acronym word of Downhill Brake Control function. When a vehicle goes down the hill, just pushing the DBC switch enables the car to keep its vehicle's speed at a constant value without operating the brake pedal. The DBC function is operated when the vehicle is on the decline and its velocity is under the predetermined speed.

ESC OFF Switch Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. (Refer to Body - "Crash Pad") 3. Check the continuity b ...

DBC Switch Repair procedures

Inspection 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad side switch assembly. (Refer to Body - "Crash Pad") 3. Check the continuity b ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Hill-Start Assist Control (HAC)
The Hill-Start Assist Control (HAC) prevents the vehicle from rolling backwards when starting a vehicle from a stop on a hill. The system operates the brakes automatically for approximately 2 seconds and releases the brake when the accelerator pedal is depressed or after 2 seconds. WARNING A ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Rear Disc Brake Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9 N.m(9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the upper arm by loosen the rear upper arm bolt (A) and nut (B). [2WD Only] Tightening torque : 137.2 ~ 156.9N.m (14.0 ~ 16.0kgf.m, 101.2 ~115.7 lb-ft) ...