Hyundai Tucson: Exterior / Body Side Moldings Repair procedures

Replacement
Roof Rack Replacement
   
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof rack cover (A).
2.
After loosening the mounting nuts, then remove the roof rack (B).

3.
Install in the reverse order of removal.
Roof Molding Replacement
   
When prying with a flat-tipped screwdriver, wrap itwith protective tape, and apply protective tapearound the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the roof rack.
2.
Using a screwdriver or remover, remove the roof molding (A).

3.
Install in the reverse order of removal.
   
Replace any damage clips.
Tailgate Garnish Replacement
   
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the tail gate trim.
(Refer to Exterior - "Tailgate")
2.
Disconnect the connector (A).

3.
After loosening the mounting nuts, then remove the tailgate garnish (A).

4.
Install in the reverse order of removal.
   
Replace any damage clips.
Rear Spoiler Replacement
   
When prying with a flat-tipped screwdriver, wrap itwith protective tape, and apply protective tapearound the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Remove the tailgate trim.
(Refer to Exterior - "Tailgate")
2.
After loosening the mounting nuts, then remove the rear spoiler (A)

3.
Disconnect the connector (A) and washer nozzle (B).

4.
Install in the reverse order of removal.
   
Replace any damage clips
Door Side Garnish Replacement
   
When prying with a flat-tipped screwdriver, wrap itwith protective tape, and apply protective tapearound the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface
1.
Using a screwdriver or remover, remove the front door garnish (A).
2.
Using a screwdriver or remover, remove the rear door garnish (B).

3.
Install in the reverse order of removal.
   
Replace any damage clips
Side Sill Garnish Replacement
   
When prying with a flat-tipped screwdriver, wrap itwith protective tape, and apply protective tapearound the related parts, to prevent damaged.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Loosen the mounting screws.
2.
Using a screwdriver or remover, remove the side sill garnish (A).
3.
Install in the reverse order of removal.
   
Replace any damage clips

Rear Door Repair procedures
Replacement Door Trim Replacement     • When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to ...

Panoramaroof Components and Components Location
Components 1. Panoramaroof frame2. Tilt lever assembly3. Glass4. Wind deflector 5. Front fixed glass6. Motor7. Mechanism rail assembly8. Impact cross member assembly9. E.M.C metal sheet10. Sunroo ...

Other information:

Hyundai Tucson (LM) 2010-2015 Owners Manual: Sunvisor
To use a sunvisor, pull it downward. To use a sunvisor for a side window, pull it downward, unsnap it from the bracket (1) and swing it to the side (2). To use the vanity mirror, pull down the sunvisor and slide the mirror cover (4). Adjust the sunvisor forward or backward (3) as needed. Use t ...

Hyundai Tucson (LM) 2010-2015 Service Manual: Special Service Tools
Special Service Tools Tool (Number and Name)IllustrationApplicationRKE Battery Checker(09954-2P100)Measuring the RKE batteryvoltage ...

© 2010-2024 www.htmanual.net