Hyundai Tucson: Bumper / Rear Bumper Repair procedures

Replacement
   
Put on gloves to protect your hands.
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not bend or scratch the cover and other parts.
1.
After loosening the mounting screws, then remove the rear combination lamp (A).

2.
Push the lock pin, disconnect the connector (A).

3.
After loosening the rear bumper side's mounting screw and clips, then disconnect the side's.

4.
Loosen the mounting bolts.
5.
Push the lock pin, disconnect the rear bumper main connector (B).

6.
After loosening the mounting screws and clips, then remove the rear bumper (A).

7.
Install in the reverse order of removal.
   
Make sure the connector is plugged in properly.
Replace any damage clips.
Rear Bumper Components and Components Location
Components 1. Rear bumper assembly2. Rear bumper mounting bracket ...

Seat & Power Seat
...

Other information:

Hyundai Tucson (LM) 2010-2015 Service Manual: Master Cylinder Repair procedures
Removal 1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the battery positive terminal and them remove the battery. 3. Disconnect the ECM connector and the ECM and battery tray. 4. Disconnect the brake fluid level switch connector (A), and remo ...

Hyundai Tucson (LM) 2010-2015 Owners Manual: Basic Mode Screen
1. Mode Displays currently operating mode. 2. Operation State From Repeat/Random(Shuffle)/ Scan, displays the currently operating function. 3. File Index Displays the current file number. 4. File Info Displays information about the current file. 5. Play/Pause Changes the play/pause state. 6 ...

© 2010-2024 www.htmanual.net