Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the center facia panel.
(Refer to BD group - "Crash pad center panel") |
3. |
Loosen the nut and bolt from BCM. |
4. |
Disconnect the connectors (A). |
Installation |
1. |
Install the BCM and connect the connectors. |
2. |
Install the center facia panel. |
Trouble Diagnostics When Using GDS |
1. |
The IPM can be diagnosed by using the GDS. The BCM
communicates with the GDS which then displays inputs and outputs along
with codes. |
2. |
To diagnose the IPM function, select the vehicle model and IPM. |
3. |
To consult the present input/out value of IPM, "Current
DATA". It provides information of IPM input/output conditions of power
supply, turn signal/brake lamp, headlamp, door locks, outside mirror,
wiper, auto-light and transmitters etc. |
4. |
To perform functional test on IPM outputs, select "Actuation Test" |
Hyundai Tucson (LM) 2010-2015 Owners Manual: Consumer information
This consumer information has been prepared in accordance with regulations issued
by the National Highway Traffic Safety Administration of the U.S. Department of
Transportation.Your HYUNDAI dealer will help answer any questions you may have as
you read this information.
HYUNDAI motor vehicles ...
Hyundai Tucson (LM) 2010-2015 Service Manual: Shift Lever Repair procedures
Removal
1.
Remove the center console.
(Refer to "Console" in BD group)
2.
Remove the snap pin (A) and the clip (B).
3.
Remove the clip (A) and then remove the shift cable assembly.
4.
Remove the shift lever assembly (A).
Tightening torque:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ...